ISA9801 Model card general specifications
-
The ImasDé WLAN card ISA9801 model, is the
first one fully developed and manufactured in Europe, complying with IEEE
802.11 standard and based on ISA Plug&Play interface.
-
ImasDé WLAN card substitutes usual network one, eliminating
the need for cables between PCs.
-
Using ISA9801 model, the network PCs can be moved freely within
the network area.
-
Very low installation cost. Maintenance free.
-
Allows several wireless LANs within the same physical network area.
-
Complies with the new IEEE 802.11 worldwide standard (June 1997).
-
Drivers for WINDOWS 3.XX, WINDOWS 95, WINDOWS 98 y WINDOWS NT available.
-
Drivers for Linux to be released soon.
|
Data Rate |
1 Mbps DBPSK
2 Mbps DQPSK |
|
|
|
|
|
|
Range
|
Up to 50 m. indoor dense office
Up to 100 m. indoor open office
Up to 800 m. outdoor |
|
|
|
|
|
|
Output
Power |
+ 20 dBm typ (100 mW)
E.I.R.P., under ETSI regulations |
|
|
|
|
|
|
Sensitivity |
-94 dBm (B.E.R. 8E-2) |
|
|
|
|
|
|
IF
Frequency |
280 MHz |
|
|
|
|
|
|
Tx Mode |
Direct Sequence Spread Spectrum (DSSS) |
|
|
|
|
|
|
Frequency
Range |
2,4 GHz ISM band (from
2.412 MHz to 2.484 MHz) |
|
|
|
|
|
|
Operating
Channels |
14 (full support of DSSS
IEEE 802.11 specifications) |
|
|
|
|
|
|
Supply
current |
500 mA typ (Tx)
350 mA typ (Rx) |
|
|
|
|
|
| |
Antenna |
3dBi gain, external omnidirectional whip (built-in
60 cm. cable & connector) |
|
|
The ImasDé WLAN
card ISA9801 model is based in PRISM TM
chip-set from HARRIS SEMICONDUCTORS (USA) and PCNet TM
Mobile from ADVANCED MICRO DEVICES (USA).
ETSI approval (ETS 300 328 Radioelectric Certificate of Acceptance and
ETS 300 339 Electromagnetic Compatibility EMC).
| Nº Spanish Homologation E DGTEL 08 98 0339
FCC Part 15 planned. |
 |
|
